Brushing Putty


High-build sanding primerSurface refinement

Why choose this product?

Create a smoother starting point for a beautifully finished door, cabinet or furniture piece. Brushing Putty fills visible wood grain and small surface defects so a carefully sanded substrate can support a refined Hollandlac or ECO finish.

  • Useful for open-grained woods such as oak and luan.
  • Helps conceal small nicks and dents during restoration.
  • Choose it when filling grain across a surface is part of your preparation plan.
Appearance
Off-white
Dry before sanding
Approximately 12–16 hours
Required next layer
FPE Oil Primer/Undercoat before finish paint

Choose your size

Price is per container in the selected size.

Size: .75L (Covers 85 square feet)
Price:
Sale price$70.00
Pickup in Malden or delivery within 20 milesCheck my delivery address

Complete your project

Include Oil Primer/Undercoat. Compare Swedish Putty for thin, knife-applied surface refinement.

How much do I need?

Approximate coverage per coat: 0.75 L — 85 sq. ft.; 2.5 L — 280 sq. ft. Grain depth and the number of filling passes affect the quantity needed.

Multiply your surface area by the number of coats. Coverage varies with texture, porosity and application. Calculate primer and finish paint separately. A 2.5 L Eurogallon is smaller than a 3.785 L U.S. gallon.

Preparation & application
  1. Clean and lightly sand the wood. Remove grease and contamination using the manufacturer's preparation instructions.
  2. Brush on a full, even coat using an inexpensive brush. Let it dry thoroughly, then sand with approximately 200-grit paper until smooth.
  3. Repeat filling and sanding if necessary. Remove dust, then apply FPE Oil Primer/Undercoat before the finish coats. This overcoat is required for both interior and exterior applications.
Before you begin

Brushing Putty and Swedish Putty are different preparation products. Brushing Putty must receive Oil Primer/Undercoat afterward; Swedish Putty uses a different sequence. Plan the entire system before starting.

Product guidance & technical references

Follow the current container label and manufacturer instructions for the full application procedure. Drying and recoating times vary with temperature, humidity and film thickness.

Manufacturer product instructions and available safety documents

A little local advice before you start.
Tell us your surface, existing finish and desired look.
Ask our paint team →

You may also like