Eurolux Interior Acrylic Matte


Interior acrylicMatte

Why choose this product?

Give living spaces a soft finish that remains practical for everyday use. Eurolux Interior Matte is a waterborne acrylic designed for interior walls, combining a restrained sheen with a washable, scrubbable surface.

  • A useful choice for living rooms, bedrooms and other frequently used interiors.
  • A low-sheen alternative to satin or glossy enamel walls.
  • Choose matte when you want a soft appearance and easy maintenance after the coating has developed its finish.
Finish
Matte
Formula / cleanup
Waterborne acrylic / hot water and detergent
Typical recoat
About 1 hour at 68°F and 65% relative humidity; conditions affect drying

Choose your size

Price is per container in the selected size.

Size: 1L (Covers 160 square feet)
Price:
Sale price$70.00

Choose your color

Tinted to order in Malden.

Pickup in Malden or delivery within 20 milesCheck my delivery address

Complete your project

Start with EUROLUX Universal Primer/Undercoat. Prefer a flatter appearance? Compare Eurolux Flat.

How much do I need?

Approximate coverage per coat: 1 L — 160 sq. ft.; 2.5 L — 400 sq. ft. With two coats, plan on approximately 80 or 200 sq. ft. of finished wall area respectively.

Multiply your surface area by the number of coats. Coverage varies with texture, porosity and application. Calculate primer and finish paint separately. A 2.5 L Eurogallon is smaller than a 3.785 L U.S. gallon.

Preparation & application
  1. Clean, repair and sand walls. Remove loose or flaking paint. Prime new walls with EUROLUX Universal Primer/Undercoat.
  2. Spot-prime exposed areas on previously painted walls, or prime the full surface to even out the substrate.
  3. Apply two coats with a suitable synthetic brush or 3/8-inch nap roller. For the smoothest result, sand dry primer and the first finish coat with 220-grit paper and remove dust.
Before you begin

Use inside only. Choose the correct FPE primer for wood, metal or plastic rather than assuming a wall-paint system suits every substrate. Always follow the current label for environmental limits and drying.

Product guidance & technical references

Follow the current container label and manufacturer instructions for the full application procedure. Drying and recoating times vary with temperature, humidity and film thickness.

Technical data sheet

Manufacturer product instructions and available safety documents

A little local advice before you start.
Tell us your surface, existing finish and desired look.
Ask our paint team →

Paint a room Pick the supplies you need for smooth interior walls.
9 in. roller cover 3/8 in. nap for smooth to lightly textured walls $4.99
9 in. roller frame Fits the standard 9 in. cover above $8.99
2½ in. angled brush Cut in around trim, corners and ceilings $8.49
1.41 in. painter’s tape Mask cured trim and other suitable surfaces $10.99
11 in. metal tray Fits the 9 in. roller and liner below $4.79
11 in. tray liner Fits the Wooster R402 metal tray above $1.49

You may also like