ABOUT
ECO Primer/Undercoat is a “hybrid”, water thinnable alkyd coating intended for new interior or exterior woodwork. This primer is the preferred foundation for any ECO or HOLLANDLAC paint system because of its ability to penetrate and lock onto new wood. If absorption of primer occurs, reprime to obtain uniform film build before painting.
APPLICATION
Tools: Use a first quality synthetic bristle brush or “hot dog” type foam roller. ECO Primer/Undercoat may also be sprayed – do not over thin (maximum 2 oz water per Eurogallon™.
Do not apply at temperatures below 40°F or above 80°F, or when relative humidity exceeds 80%.
Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so.
SURFACES
New woodwork and previously painted surfaces
TECHNICAL
-
Binder: urethanized alkyd emulsion
-
Pigments: high quality pigments
-
Vehicle: Water
-
Thinner: Water
-
Specific Gravity [g/cm3]: 1.28
- Solid contents
- by weight: 51%
- by volume: 37%
-
Viscosity: 115-120 KU
- Recommended thickness:
- wet: 220 microns/coat (applied in 2 coats)
- dry: 80 microns/coat (applied in 2 coats)
-
Drying time: 1 hour tack free, 6 hours recoatable
-
VOC: 72
- Recommended Mil Thickness per coat:
- 1 dry coat of 40 microns or 1.575 Mil
- 1 wet coat of 110 microns or 4.330 Mil
*When spraying, additional coats may be necessary to achieve this Mil Thickness
MDS/TDS
TDS:TECHNICAL DATA SHEET
MDS:Eco Primer Undercoat
