ECO Brilliant


Water-thinnable hybrid enamelHigh gloss

Why choose this product?

Bring a bright, polished finish to cabinetry, doors and trim with ECO Brilliant. This water-thinnable urethane-alkyd hybrid combines an enamel finish with a lower-odor application experience. It contains alkyd resin; it is not a conventional acrylic wall paint.

  • Choose a reflective finish to emphasize doors, cabinets and architectural details.
  • Suitable for properly prepared interior and exterior woodwork.
  • Water is the specified thinner; application still requires the preparation and patience of an enamel system.
Finish
Brilliant high gloss
Formula
Waterborne urethane-alkyd hybrid
Recoat / cure
About 16 hours / about 21 days

Choose your size

Price is per container in the selected size.

Size: 1L (Covers 168 square feet)
Price:
Sale price$75.00

Choose your color

Tinted to order in Malden.

Pickup in Malden or delivery within 20 milesCheck my delivery address

Complete your project

Pair with ECO Primer/Undercoat. Compare ECO Satin for less reflection, or Eurolux Matte for everyday interior walls.

How much do I need?

Approximate coverage per coat: 1 L — 168 sq. ft.; 2.5 L — 420 sq. ft.

Multiply your surface area by the number of coats. Coverage varies with texture, porosity and application. Calculate primer and finish paint separately. A 2.5 L Eurogallon is smaller than a 3.785 L U.S. gallon.

Preparation & application
  1. Clean, sand and prime new wood with ECO Primer/Undercoat or FPE Oil Primer/Undercoat. Previously latex-painted surfaces also need the specified primer.
  2. Apply two even finish coats by brush, roller or professional spray. Avoid repeatedly brushing or rolling paint as it starts to set.
  3. Sand between ECO Brilliant topcoats with 220–320 grit for adhesion, then remove dust. Allow adequate drying before sanding and recoating.
Before you begin

Not suitable for floors. Do not use on exterior masonry or stucco, or over unresolved moisture-related paint problems. Apply within the manufacturer's temperature and humidity limits.

Product guidance & technical references

Follow the current container label and manufacturer instructions for the full application procedure. Drying and recoating times vary with temperature, humidity and film thickness.

Manufacturer product instructions and available safety documents

A little local advice before you start.
Tell us your surface, existing finish and desired look.
Ask our paint team →

Project supplies Protect nearby surfaces. Check this coating’s application instructions for the right brush, roller or sprayer.
1.41 in. painter’s tape Mask cured trim and other suitable surfaces $10.99
3½ × 12 ft. drop cloth Protect floors and nearby surfaces $29.99

You may also like